5. Press another period (LEAVE, RETURN, SLEEP) and set time and temperatures for each.
6. Press DONE to save and exit (or press CANCEL to exit without saving changes).
Note: You can press CANCEL PERIOD to eliminate any unwanted time period.
Overriding schedules temporarily
1. On the home screen, press s or t to immediately adjust the temperature.
2. Adjust the time to when you want the hold to end (the default is the end of the current period).
The new setting will be maintained until the time shown under Hold Until. When the timer expires, the
schedule will resume, and the temperature will return to the setting for the current time period.
To cancel the temporary setting at any time, press CANCEL (or SCHED). The program schedule will
To Next Page
Loading...
