T4 Pro
T6 Pro
RTH5160 Non-Programmable Thermostat
WiFi Touchscreen Thermostat Installation Manual
WiFi Color Touchscreen Thermostat
VisionPRO WiFi Thermostat
Connecting to your Wi-Fi network
To complete this process, you must have a wireless device connected to your home wireless network.
Any of these device types will work:
Laptop (recommended)
Tablet (recommended)
Smartphone
If you get stuck… at any point in this procedure, restart the thermostat by removing the thermostat
from the wallplate, wait for 5 seconds, and snap it back onto the wallplate. Return to Step 1 in this
procedure, which starts on the next page.
The message at the top of your thermostat must say Wi-Fi SETUP.
1. Connect to your thermostat.
1a. On your laptop, tablet or smartphone, view the list of available networks.
1b. Connect to the network called NewThermostat_123456 (the number will vary).
Note: If you are asked to specify a home, public, or office network, select Home Network.
2. Join your home network.
2a. To access the Thermostat Wi-Fi Setup page, open a web browser on your wireless device. The
browser should automatically direct you to the correct page; if it does not, go to
http://192.168.1.1.
2b. On the Thermostat Wi-Fi Setup page, find the name of your home network and click its
Connect button.
2c. Complete instructions for joining the network. Depending on your network setup, you may see
an instruction such as Enter Password (your home network password).
To Next Page
Loading...
