Setting the clock
1. Press CLOCK to display setting arrows.
2. Press Δ or ∇ to adjust the time. (You can advance the time more quickly by holding the s or t
buttons.)
3. Press DONE to save and exit (or press CANCEL to exit without changing the time).
Note: You should never need to adjust the real-time clock; it automatically updates for daylight saving
time and all date/time information is stored.
Note: To change the current week day format, see “Schedule Options” on page 53.
Setting the fan
1. Press FAN to select fan operation.
2. Press FAN again to select ON or AUTO (toggle to re-select). The selected option blinks.
3. Press DONE to save setting. Your selection appears under FAN.
ON: Fan is always on.
AUTO: Fan runs only when the heating or cooling system is on.
To Next Page
Loading...
