The Message Center will display Wi-Fi DISCONNECTED for 1 minute.
After that it will display Wi-Fi SETUP.
Re-connect to a Wi-Fi network by following the steps on page 26.
Smart Response Technology
This feature allows the thermostat to “learn” how long the heating/cooling system takes to reach
programmed temperature settings, so the temperature is reached at the time you set.
For example: Set the Wake time to 6:00 am, and the temperature to 70°. The heat will come on before
6:00 am, so the temperature is 70° by 6:00 am.
Note: System setting function 0530 controls Smart Response Technology. See “Smart Response
Technology” on page 57.
The message “Recovery” is displayed when the system is activated before a scheduled time period.
Compressor protection
This feature forces the compressor to wait a few minutes before restarting, to prevent equipment
damage.
To Next Page
Loading...
