Note: If your Wi-Fi network does not appear in
the list on the Thermostat Wi-Fi Setup page:
• Try performing a network rescan by pressing the Rescan button. This is helpful in areas with a
lot of networks.
• If you are connecting to a hidden network, then enter the network SSID in the textbox, select
the encryption type from the drop down menu, and click on the Add button. This manually adds
the network to the top of the list. Click on the new network in the list and enter the password if
necessary. Click on Connect to join the network.
3. Make sure your thermostat is connected.
Notice the thermostat message center. It will display CONNECTING… for up to 30 seconds, then
CONNECTION SUCCESSFUL for one minute.
To Next Page
Loading...
