INSTALLATION INSTRUCTIONS
69-2751-05
S9361A207x
Integrated Boiler Controllers
APPLICATION
These integrated boiler control modules provide
ignition sequence, flame monitoring and safety
shutoff for intermittent pilot spark ignition heating
systems. This control also provides limit-rated boiler
temperature control with a single limit-rated sensor
and “on-board” display interface capability.
• S9361A20XX - Atmospheric draft appliances.
• S9361A20XX - Induced draft appliances.
• Spark ignition, Intermittent Pilot, Single rod.
• “On board” Display.
• System Circulator and Domestic Hot Water
Circulator output.
• Enabled with EnviraCOM™ communication
capability to support remote monitoring and
diagnostics.
• Limit-rated Temperature Sensing Probe.
•One Sensor Model
SPECIFICATIONS
IMPORTANT:
The specifications given in this publication do
not include normal manufacturing
tolerances. Therefore, an individual unit may
not match the listed specifications exactly.
Also, this product is tested and calibrated
under closely controlled conditions, and some
minor differences in performance can be
expected if those conditions are changed.
Model Numbers
S—Switching Control
9 3—Integrated Hydronic Control Platform
6—Spark Ignition
1—Integrated On-Board Display
A—Boiler Control
2—On/Off Circulator
S 9361A 2 000
To Next Page
Need help?
General
