EDA56 User Guide 19
You can use these accessories to connect your mobile computer to your
workstation:
• Home Base or Ethernet Home Base, and a standard USB Type B to A cable.
• Snap-On Adapter, Tethered USB Cable Client (EDA52-SN-USB-0).
• A standard USB communication cable with Type C connector.
Configure USB Connection and Transfer Files
Note: The EDA56 supports Hi-Speed USB communications (USB 3.0) with theoretical
maximum data transfer rate of 5Gbps. USB on-the-go (OTG) supported.
1. Connect the mobile computer to your workstation.
2. On the mobile computer, swipe down from the top of the screen to see the
notifications.
3. Tap the Android System notification twice to open the options menu.
You may need to scroll down to the bottom of your notifications to find it.
4. Select either File Transfer or PTP (picture transfer protocol).
5. Open the file browser on your workstation.
6. Browse to the mobile computer. You can now copy, delete, or move files
between the EDA56 and your workstation.
Accessories for the Computer
The EDA56 ships with a partially discharged battery. All other accessories are
ordered and shipped separately.
For a complete list of compatible accessories for your mobile computer and their
part numbers see the EDA52 Accessory Guide available for download at
sps.honeywell.com.
Contact your local sales representative for ordering information.
Accessory Description
Single Charging Dock
(EDA50-HB-R)
Charging cradle for charging ScanPal EDA56 (Compatible with
EDA51 scan handle when used with Backwards Adapter: EDA52-
ADC). Does not include charging cable; cable and power adapter
plugs must be ordered separately.
Single Charging Dock
(EDA52-HB-0, EDA52-HB-1,
EDA52-HB-2, EDA52-HB-3,
EDA52-HB-5)
Charging cradle for charging ScanPal EDA56 mobile computer
and battery (Compatible with EDA56 scan handle).
To Next Page
Loading...
Need help?
General