60 EDA56 User Guide
Configure Proxy Settings for a Wi-Fi Network
If you need to connect to network resources through a proxy server, you can
configure settings for the proxy server for each Wi-Fi network you add. By default,
the Wi-Fi networks you add are not configured to connect through a proxy server.
Note: Proxy settings apply only to the Wi-Fi network you modify. You must change proxy
settings for each network requiring a proxy server.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Network & internet > Wi-Fi. The list of available Wi-Fi
networks appears.
3. Tap the icon next to a connected network.
4. Tap the icon to edit network details.
5. Tap Advanced options.
6. Expand the Proxy menu, and then select Manual.
7. Enter the proxy settings for the network.
8. Tap Save.
Disable Wi-Fi Notifications
By default, when Wi-Fi is enabled, you receive notifications in the Status bar when
the computer discovers a wireless network. You can disable these notifications.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Network & internet. > Wi-Fi. Verify the Wi-Fi radio is turned
On.
3. Tap Wi-Fi preferences. The Configure Wi-Fi menu appears.
4. Tap Notify for public networks to toggle the setting On or Off.
Honeywell Wi-Fi Settings
To access Wi-Fi preference settings for advanced configuration of the wireless
802.11 radio in the mobile computer:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Network & internet. > Wi-Fi.
3. Tap Wi-Fi preferences. The Configure Wi-Fi menu appears.
4. Tap Advanced > Honeywell Wi-Fi Settings.
5. Tap a setting to enable or disable the option or to access additional parameters
To Next Page
Loading...
Need help?
General