10. RF Safety, Maximum Permissible Exposure (MPE) Statement
10.1. MPE Statement
20 SmartLine Wireless Transmitter Professional Installation Guide Revision 1
10. RF Safety, Maximum Permissible Exposure (MPE)
Statement
10.1 MPE Statement
To comply with FCC’s and Industry Canada’s RF exposure requirements, the following antenna
installation and device operating configurations must be satisfied:
Remote antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with
a separation distance between the antenna(s) of at least 20 cm and a separation distance of at least
20 cm from all persons.
When using integral antenna(s) the SmartLine Wireless Transmitter unit must not be co-located
with any other antenna or transmitter device and have a separation distance of at least 20 cm
from all persons.
To Next Page
Loading...
