VISIONPRO® 8000 SMART THERMOSTAT
35 33-00096—04
1402 Indoor Humidity
Offset
-12% to 12% (in 1% increments)
0% Both 0% - No difference in displayed humidity and the
actual room humidity.
The thermostat displays up to 12% lower or higher
than the actual measured humidity.
1404 Alert Light Indicator
On
Off
On Both The thermostat has a built in light indicator. When an
alert is active, the light will be on continuous if the
thermostat is powered with 24 VAC (C wire) or it will
flash if the thermostat is powered with batteries only.
The light also turns on when the system setting is set
to Em Heat.
Select On to use the light indicator or select Off to
turn off the light.
1500 Dealer Name
[Dealer Name]
None Both Dealer information is displayed to the user when an
alert is active and the user can access this
information by selecting "Dealer Information" in the
Menu.
1500 Dealer Phone
[Dealer Phone]
None Both
1501 Dealer Email
Address
[Dealer Email Address]
None Both
1501 Dealer Website
[Dealer Website]
None Both
1502 Dealer Message
[Dealer Message]
None Both
Table 2. Installer Setup (ISU) Table. (Continued)
ISU
Number
Installer Setup
Name Settings Default
Residential,
Commercial
or Both Notes
To Next Page
Loading...
