Honeywell TL9160AR - Installer Setup Table; Temperature Unit and Time Format

System Installation Guide
69-2474EFS—01 12
Installersetuptable
Setup function Options Defaultsetting Tomodify,see
Temperatureunit °C/°F °F Page12
Timeformat 12h/24h 12h Page12
Minimumsetpoint 41°Fto86°F(5°Cto30°C) 41°F(5°C) Page13
Maximumsetpoint 41°Fto86°F(5°Cto30°C) 86°F(30°C) Page13
Anti-freeze On/Off On Page14
Keypadlock None/Partial/All None Page15
Zonename 1,...,57 52 Pages16-17
AdaptiveIntelligentRecovery On/Off On Page18
Programmablemode On/Off On Page18
Tosetthedate&time,thescheduleandtheautomaticdaylightsavings,referto
User’sGuide.
Temperatureunit/Timeformat
Followthisproceduretoselectthetemperatureunit(°Cor°F)andtimeformat(12hor
24h).
Thetimeformatselectionisavailableonlyifthethermostatisinprogrammablemode.
# Display Button Step
1)
Fromtheinstaller’ssetup
menu,pressOKtoselectthe
Formatmenu.
2)
Press or tochangethe
temperatureunit.PressOK.
3)
Press or tochangethe
timeformat.PressOK.