Honeywell TL9160AR - Zone Name; Setting Zone Identification

System Installation Guide
69-2474EFS—01 16
Zonename
Thezonenameisusedtoidentifythethermostatonthewirelessremotecontrol.By
default,thezonenameisThermostat(zonename52).Ifyouhaveawirelessremote
controlandmorethanonewirelessthermostat,changethezonenameofthethermostat
toidentifyitfromtheotherthermostats.Forexample,ifthethermostatisinthelivingroom,
setthezoneto31.
# Display Button Step
1)
Fromtheinstaller’ssetup
menu,press toselectLink
andpressOK.
2)
PressOKtoselectZone.
3)
Press or tosetthezone
name(seepage17).Press
OK.
4)
PressExitoncetoreturn
toinstaller’ssetupmenu
ortwicetoreturntohome
screen.