Honeywell UDC3200 series - CE Conformity Information

2 UDC3200 Universal Digital Controller Operator Manual 04/08
Keys and Functions
FunctionFunctionFunction
Selects functions within each
configuration group.
Man
Auto
Man
Auto
Man
Auto
Selects Manual or Auto mode.
SetupSetup
Scrolls through the configuration
groups.
SP
Select
SP
Select
SP
Select
Hold key down to cycle through
configured setpoints.
Lower
Display
Lower
Display
Lower
Display
Returns Controller to normal display
from Set Up mode. Toggles various
operating parameters for display.
Run
Hold
Run
Hold
Run
Hold
Enables Run/Hold of the SP
Ramp or Program plus Timer
start.
Increases setpoint or output value.
Increases the configuration values or
changes functions in Configuration
mode groups.
Decreases setpoint or output
value. Decreases the
configuration values or changes
functions in Configuration mode
groups.
Infrared transceiver NEMA4X and IP66 screw
attachment (each corner)
1.3 CE Conformity (Europe)
73/23/EEC
89/336/EEC
Product Classification:
Enclosure Rating:
Installation Category (Overvoltage Category):
Pollution Degree:
EMC Classification:
Method of EMC Assessment:
Declaration of Conformity:
EMC