Honeywell Xenon 1952H - Page 283

Xenon XP User Guide 265
GS1-128 Default All GS1-128 Settings GS1DFT 171
*On GS1ENA1 171
Off GS1ENA0 171
GS1-128 Message Length Minimum (1 - 80) *1 GS1MIN## 171
Maximum (0 - 80) *80 GS1MAX## 171
Telepen Default All Telepen
Settings
TELDFT 172
*Off TELENA0 172
On TELENA1 172
Telepen Output *AIM Telepen Output TELOLD0 172
Original Telepen Output TELOLD1 172
Telepen Message Length Minimum (1 - 60) *1 TELMIN## 172
Maximum (1 - 60) *60 TELMAX## 172
UPC-A Default All
UPC-A Settings
UPADFT 173
Off UPBENA0 173
*On UPBENA1 173
UPC-A Check Digit Off UPACKX0 173
*On UPACKX1 173
UPC-A Number System Off UPANSX0 174
*On UPANSX1 174
UPC-A 2 Digit Addenda *Off UPAAD20 174
On UPAAD21 174
UPC-A 5 Digit Addenda *Off UPAAD50 174
On UPAAD51 174
UPC-A Addenda Required *Not Required UPAARQ0 174
Required UPAARQ1 174
Addenda Timeout Range (0 - 120) *500 DLYADD##### 175
UPC-A Addenda
Separator
Off UPAADS0 175
*On UPAADS1 175
UPC-A/EAN-13 with Extended
Coupon Code
*Off CPNENA0 175
Allow Concatenation CPNENA1 175
Require Concatenation CPNENA2 175
Addenda Timeout Range (0 - 120) *500 DLYADD##### 176
Coupon GS1 DataBar Output *GS1 Output Off CPNGS10 176
GS1 Output On CPNGS11 176
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page