MISCELLANEOUS COMMANDS
TURN CHIME OWOFF
Chime is an optional feature that causes tha keypad to chime when selected
doors are opened while the burglary protection is off or disarmed.
Only your installer can program a zone for the chime feature, but once
programmed, you can turn chime on or off to meet your daily needs, To turn
chime on or off:
Press [#] then [6]
SET AUTO ON TIME
Set Auto On Time lets you set the time your system will automatically turn on.
Press [#] then [5] [user 1 or 2 code] [hr] [hrJ [mini [rein,]
The English read out keypad will prompt you for the required entries.
(user code is not required if so programmed by installer)
DOOR STRIKE
VIEW TIME
SET TIME
To acfiiate door strikes
Press [#] then [9] [user code] [Door #]
where the door number is as follows
1
2
[#l [m
(Note that ths installer may have
aeaigned user 13 as the only user that
can perform the door etrike function.)
[#] [3] [user 1 or 2 code] [hr,] [hr,] [mini,] [min,l [mnth,l [mnth,l [day,] [dayJ
[year,] [year,]
(user code is not required if so programmed by installer)
VIEW AUTOARM .TIME
[#] .[8] [user 1 or 2 code]
m
(user code is not required if so programmed by installer)
Page 13
To Next Page
Loading...
