Honeywell XT Series - Page 8

XT Series Personal Gas Detector
8
Should the Standard Display XT unit be exposed to a level of gas in excess of the alarm set points
the unit will display the concentration of the gas. If the measured reading exceeds the range of
the detector then the numerical digits will flash.
The Real Time Display XT displays the concentration reading all the time. The lifetime remaining
is displayed in the self-test mode.
Standard Display Real Time Display
Below Alarm
Displays the lifetime remaining Displays the gas concentration
Above Alarm
Displays the gas concentration Displays the gas concentration
Self-test
Alarm set points, peak reading
and time since peak
Alarm set points, peak reading,
time since peak and lifetime
remaining