Honeywell Youjie YJ-HF600 - Page 128

9 - 10
Working Orientation *Upright ROTATN0 3-12
Vertical, Bottom to Top (Rotate
CCW 90°)
ROTATN1 3-12
Upside Down ROTATN2 3-12
Vertical, Top to Bottom (Rotate
CW 90°)
ROTATN3 3-12
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR 4-2
Prefix Add Prefix PREBK2## 4-2
Clear One Prefix PRECL2 4-2
Clear All Prefixes PRECA2 4-2
Suffix Add Suffix SUFBK2## 4-2
Clear One Suffix SUFCL2 4-3
Clear All Suffixes SUFCA2 4-3
Function Code Transmit *Enable RMVFNC0 4-3
Disable RMVFNC1 4-3
Intercharacter Delay Range 0 - 1000 (5ms increments) DLYCHR## 4-3
User Specified
Intercharacter Delay
Delay Length
0 - 1000 (5ms increments)
DLYCRX## 4-4
Character to Trigger Delay DLY_XX## 4-4
Interfunction Delay Range 0 - 1000 (5ms increments) DLYFNC## 4-4
Intermessage Delay Range 0 - 1000 (5ms increments) DLYMSG## 4-4
Data Formatter Selections
Data Format Editor *Default Data Format (None) DFMDF3 5-1
Enter Data Format DFMBK3## 5-2
Clear One Data Format DFMCL3 5-2
Clear All Data Formats DFMCA3 5-2
Data Formatter Data Formatter Off DFM_EN0 5-12
*Data Formatter On,
Not Required,
Keep Prefix/Suffix
DFM_EN1 5-12
Data Format Required,
Keep Prefix/Suffix
DFM_EN2 5-12
Data Formatter On,
Not Required,
Drop Prefix/Suffix
DFM_EN3 5-12
Data Format Required,
Drop Prefix/Suffix
DFM_EN4 5-12
Data Format Non-Match Error Tone *Data Format Non-Match Error
Tone On
DFMDEC0 5-13
Data Format Non-Match Error
Tone Off
DFMDEC1 5-13
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page