6 - 21
UPC-E0 Leading Zero
When this feature is On, there is a space between the data from the bar code and the data from the addenda. When turned
Off, there is no space. Default = On.
UPC-E0 Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-E data. Default = Off for both 2 Digit and 5 Digit Addenda.
UPC-E1
Most U.P.C. bar codes lead with the 0 number system. For these codes, use UPC-E0 (page 6-19). If you need to read codes
that lead with the 1 number system, use the UPC-E1 On selection. Default = Off.
To Next Page
Loading...
