Honeywell Youjie YJ-HF600 - Datalogic Magellan aux Port Configuration; NCR Bioptic aux Port Configuration; Wincor Nixdorf Terminal Default Settings

2 - 4
Datalogic™ Magellan
®
Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Datalogic Magellan auxiliary port configuration. This bar
code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
NCR Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for an NCR bioptic scanner auxiliary port configuration. The fol-
lowing prefixes are programmed for each symbology:
Wincor Nixdorf Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf terminal. This bar code sets the baud rate
to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Symbology Prefix Symbology Prefix
UPC-A A Interleaved 2 of 5 b
UPC-E E0 Code 128 f
Code 32
Pharmaceutical
(PARAF)
a
EAN-8 FF Code 39 a
EAN-13 F
Datalogic Magellan Settings
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings