Hootoo IP Wireless / Wired Camera - Device Information Details; Setting Camera Name Alias; Device Clock and Time Synchronization

13
1）the right interface will indicate
the parameter setting operation is successful, please click OK
then refresh.
2) the right interface will indicate the parameter setting
operation is successful, and need restart to finish
setting, please click OK.
If system indicates to restart (as right photo), please single
click yes (Y) and then enter again.
3.4.1. Device Information
The device information includes the above interfaces, device serial number
（MAC）、device system firmware version, device application firmware version.
3.4.2. Device Name Settings
Here it displays camera name, e.g.: search displayed name on search bar, the following
refer multiple channels equipments setting etc.
3.4.3. Device Clock Settings