To Next Page
W
wattspaulSep 12, 2025
How to fix Hoover H-WASH 700 error E2?
- CcharleshuffSep 12, 2025
If your Hoover Washer is showing error code E2 or the LEDs are flashing twice, make sure the water supply tap is open and that the water supply hose isn’t bent, kinked, or trapped. Also, ensure the drain pipe is at the proper height as shown in the installation section. Close the water supply tap, unscrew the filler hose from the back of the washing machine and make sure the “anti-sand” filter is clean and not blocked. Finally, check that the filter is not clogged and that there are no foreign bodies inside the filter compartment that can obstruct the proper flow of water.
General
