Why is the cleaning power weak on my Hoover Robocom 2?
If your Hoover Vacuum Cleaner's cleaning power is weak, start by emptying the dust container. If the problem persists, check and clean the filter, motor, floor brushes, sensors, and drive wheels.
What to do if my Hoover Robocom 2 cleans intermittently?
If your Hoover Vacuum Cleaner cleans intermittently, you should first check the cleaning times that have been set. Also, check and clean the sensors.
What to do if Robo.com² battery is too hot in my Hoover Robocom 2 Vacuum Cleaner?
If your Hoover Vacuum Cleaner's Robo.com² battery is too hot, switch it off and allow it to cool down for 30 minutes.
How to fix a Hoover Vacuum Cleaner remote control that is not working?
If the remote control for your Hoover Vacuum Cleaner isn't working, first check the batteries. If that doesn't solve the issue, check the charger base.
General| Brand | Hoover |
|---|---|
| Model | Robocom 2 |
| Category | Vacuum Cleaner |
| Language | English |
Essential warnings for safe operation, handling, and electrical safety of the vacuum cleaner.
Post-use procedures, supervision for vulnerable users, and precautions for stairs and reflective surfaces.
Specific guidance on battery maintenance, charging, and potential hazards.
Lists all components included in the Robo.com² package, detailing the robot and its accessories.
Identifies all parts and features visible on the top surface of the Robo.com² unit with labels.
Identifies all parts and features visible on the bottom surface of the Robo.com² unit with labels.
Identifies the parts, indicators, and connectors of the Charger Base Station.
Identifies the parts, settings, and operational indicators of the Virtual Barrier accessory.
Details all buttons, indicators, and functions of the Remote Control unit.
Identifies the indicators and touch controls located directly on the Robo.com² unit.
Guidance on handling packaging materials and the initial charging process for the robot's battery.
Instructions for positioning the base station, connecting power, and different methods of charging the robot.
Step-by-step instructions for setting up and configuring the Remote Control and the Virtual Barrier accessory.
Procedures for turning on the robot and setting the current date and time for scheduling.
Explains various cleaning modes, manual navigation, and special functions like Full & GO and Turbo speed.
Guide on programming the robot to perform cleaning tasks automatically on a daily or weekly basis.
Detailed instructions for setting up cleaning schedules and using additional features like the UV lamp.
Instructions for emptying the dust container and cleaning or replacing the pre-motor filter for optimal performance.
Procedures for cleaning the motor assembly and the main floor brushes to maintain efficiency.
Steps for replacing the main floor brushes and cleaning debris from the robot's drive wheels.
Covers cleaning, correcting deformation, replacing edge brushes, cleaning the front wheel, and cleaning the floor sensors.
Instructions for cleaning sensor windows, floor polisher pads, and replacing batteries in the robot, remote, and barrier.
A guide to identifying common issues with the Robo.com² and applying the appropriate solutions.
Explains the specific meaning and recommended actions for various error codes displayed by the robot.
Information on replacement parts, consumables, quality standards, and environmental disposal guidance.
Details regarding the product's guarantee conditions and the process for making warranty claims.
To Next Page