1
How to Assemble
I
1,
Attach hose
With cleaner handle in lowest
position, open hose door and
insert hose end with tabs into
cleaner.
Turn hose end to lock in place.
To remove hose, turn in opposite
direction.
Stretch hose over hose rack and
push opposite hose end
firmly
into “cup” in rack.
Note:
The hole in the “cup” in
the rack is a necessary design
element and will not
inhibit
the
cleaner’s performance.
When cleaning floors,
hose
should remain attached to
cleaner and rack.
2m
Attach tools
Position wands in side of hose
rack and snap into place.
5
To Next Page
Loading...
