A
2.8 To adjust height setting, PUSH DOWN and
TURN knob (A) to desired height setting.
For maximum cleaning performance, the following
carpet height settings are recommended:
• Lowest setting: for all types of carpet and
bare floors.
• Higher settings: for very deep pile carpet,
where easier pushing effort is desired, while
maintaining good cleaning performance.
2.8
If the vacuum is difficult to push, push down and
turn knob to the next higher setting.
CARPET HEIGHT ADJUSTMENT
IMPORTANT
TRANSPORTING CLEANER
2.6 To move your
cleaner from room to
room, put handle in
upright position, tilt
cleaner back on rear
wheels and push
forward.
2.6
HANDLE POSITIONS
2.7
2.7 The handle of your
cleaner has two
positions: 1) Upright for
storage and when using
cleaning tools. 2)
Operating position for
general operation on
carpets and floors.
Step on handle release
pedal to lower handle.
1
2
7
Actual model may vary from images shown.
2.5 Press Handle
Release (A) to fold the
handle to storage posi-
tion.
FOLDING HANDLE
for storage.
(Available on select models only)
2.5
A
To Next Page
Loading...
Need help?
General
