Hoover UH70603 User Manual

2.1
VACUUM DESCRIPTION
2.2 Plug cord into
electrical outlet.
To turn vacuum ON,
push ON/OFF switch
once.
To turn vacuum OFF,
push switch again.
2.3 For optimal cleaning performance on bare floors
and carpet with pile deeper than 1”, brushroll should
be turned off.
The vacuum is shipped with the brushroll in the ON
position. To turn brushroll OFF for Suction Only
Mode, step on pedal (A).
1
2
3
5
8
9
22
15
10
12
16
7
18
19
11
2.2
2.3
A
2. HOW TO USE
1. Handle**
2. ON/OFF Switch
3. Dirt Cup Release Button
4. Carry Handle
5. Dirt Cup
6. Stair Cleaning Handle
7. Headlight*
8. Height Adjustment
9. Furniture Guard
10. Brushroll On/Off Pedal*
(Suction Only Mode)
11. Cord Rewind Pedal*
12. Filter made with HEPA media
and Carbon Filter* Access
13. Rinsable Filter Access
14. System Check Indicator
15. Air-Powered Hand Tool **
16. Crevice Tool (inside wand)
17. Telescoping Wand
18. Hose
19. Handle Release Pedal
20. Hose Tube
21. Hose Release Button
22. Dusting/ Upholstery Tool**
SUCTION ONLY MODE/ BRUSHROLL SHUT-OFFON-OFF SWITCH
2.4 Grasp the end of the plug and pull to release cord
from cord reel until red tape is reached.
CORD RELEASE
13
21
20
6
2.4
14
*Available on select models only
**Varies per model
17
for bare floors and very high pile carpet
When pulling on the cord, yellow tape will identify
when the cord is almost fully extended. When red
tape is visible on the cord, the cord has reached its full
length. Do not pull the cord past the red tape
6 Actual model may vary from images shown.
4
Pedal (A) is inactive when the cleaner is in the
upright position.
IMPORTANT
Brushroll should be in off position for cleaning of
high pile carpet deeper than 1”.
CAUTION
! !
IMPORTANT

Hoover UH70603 Specifications

General

Brand	Hoover
Model	UH70603
Category	Vacuum Cleaner
Language	English