11
Upright Mode
1. Step on nozzle and pull handle back.
2. Turn ON vacuum.
3. Allow FloorSense™ to detect floor type
and automatically adjust settings.
Tip - For optimal performance, ensure the FloorSense™ control is
switched to the ON position.
Above Floor Mode
1. Press wand or handle release and
pull handle up.
2. Attach cleaning accessory to the
end of the wand or handle.
3. Turn ON vacuum.
Using Your Hoover
®
REACT
™
Upright
CAUTION
Use extra care when cleaning on stairs. To avoid personal
injury or damage, and to prevent the cleaner from falling,
always place cleaner at the bottom of the stairs or on
the floor. Do no place cleaner on stairs or furniture, as it
may result in injury or damage. When using tools, always
ensure handle is in the upright position.
!!
CAUTION
Not to be used for grooming a pet.
!!
CAUTION
When vacuum is reclined with brush roll switched
on, never leave the vacuum in one position for any
long period of time.
! !
Attach Cleaning
Accessory
Wand or Handle
Release
To Next Page
Loading...
Need help?
General
