Horotec FLASHTEST - Product Capabilities and Operation Modes; Key Device Features; Operational Test Categories

3
1. DESCRIPTION
2. OPERATION
HOROTEC© Flashtest is a multifunctional portable touchscreen tester, specifically designed for the control of watches and quartz mechanisms.
This precision device is easy to handle and is intended to test analogue quartz watches and movements with both closed and open watchcases.
HOROTEC© Flashtest is able to:
A. Measuring tension of unloaded batteries from 0 to 19.999 V.
BATTERY
+
BATTERY TEST
B. Measuring tension of batteries under load from 0 to 19.999 V.
BATTERY
+
BATTERY TEST
+
SIMUL
C. Measuring the movement supply voltage (1.5 V or 3.0 V).
BATTERY
+
SUPPLY 1.5V
ou
SUPPLY 3.0V
D. Measuring the coil resistance.
COIL
E. Unjamming the wheel trains.
TURBO
F. Measuring (gain/loss) the stability of the rate of analogue quartz watches.
ACCURACY
G. Checking the correct functioning of the circuit :
CIRCUIT
a. Electrical impulse
CIRCUIT
+
IMPULSE
b. Measuring the consumption of the electric circuit.
CIRCUIT
+
1.5V CONSUMPTION
or
3.0V CONSUMPTION
H. Measuring the consumption of a watch during its operation.
CIRCUIT
+
1.5V CONSUMPTION
or
3.0V CONSUMPTION
WATCH BATTERY TESTER : The following tests are made on the metal plate on the right of the device :
A. Measuring tension of unloaded batteries.
B. Measuring tension of batteries under load.
QUARTZ ANALOG WATCH : The following tests are made on the blue velvet plate on the left of the device :
E. Unjamming the wheel trains.
F. Measuring (gain/loss) the stability of the rate.
G. Checking the correct functioning of the circuit : electrical impulse and measuring the consumption of the electric circuit.
E. Unjamming the wheel trains.
F. Measuring (gain/loss) the stability of the rate.
G. Checking the correct functioning of the circuit.
A. Measuring tension of unloaded batteries.
B. Measuring tension of batteries under load.