¾ Tight tting clothes / protective clothing, pos-
sibly a hair net
¾ Safety shoes, protective gloves
¾ safety goggles to protect the eyes against
dust or spray, when working with fertiliser or
liquid fertiliser (follow the instructions of the
fertiliser manufacturer)
¾ respirator masks and protective gloves when
handling dressing or dressed seed (follow
the instructions of the pickling agent manu-
facturers)
¾ Determine the personal protective equipment
for the corresponding work place.
¾ Provide effective protective equipment in
proper condition.
¾ Never wear rings, bracelets or other jewellery.
¾ Pay attention to the permissible transport
widths and heights. Pay attention to the trans-
port height when passing under bridges and
low hanging overhead power lines.
¾ Do not exceed the permissible axle loads, tyre
load bearing capacities and total weights, in
order to ensure sucient steering and braking
capabilities. The front axle must be loaded
with at least 20 % of the tractor weight.
For road transport the machine must be set to
transport position. The machine must have been
folded up and secured, see chapter "Folding"
and "Connecting and transport position".
¾ Clean soil from the folding areas before fold-
ing up. Otherwise there could be damage to
the mechanics.
¾ If present: Secure the hydraulic cylinders on
undercarriage and drawbar in transport posi-
tion against uncontrolled movements using
aluminium clips, see chapter “Connecting and
transport position”.
¾ Assemble lighting, warning and protective
features and check the function.
¾ Before road travel clean the entire machine
from picked up dirt.
Handling is aected by the connected equip-
ment.
¾ Consider the wide overhang and the centrifu-
gal mass of the implement as well as the lling
capacities, especially when cornering.
Raised machine (Three-point hydraulics):
¾ Consider the limited stability and steerability
of the tractor.
For transport on public roads, only drive
with .
For transport on public roads pay atten-
tion to the permissible top speed men-
tioned in the type approval!
The specications in the type approval
document or in the technical data are
decisive for the design dependent top
speed.
Always match the travel mode to the
road conditions to avoid accidents and
damage to the undercarriage.
Consider your personal abilities, carriage
way, trac, sight and weather conditions.
8
Personal protective outfit
Missing or incomplete protective equipment
increases the risk of health damage.
Personal protective equipment includes,
e.g.:
Safety in Traffic