horsch Avatar SD 40 - Use in the Field; Brake pressure adjustment

Ensure leak tightness of seed hopper and
the entire pneumatic system to avoid leaks.
Leaks will cause sowing faults.
Air losses reduce the placing quantity; this
could even drop to zero.
Pressure display for fan drive
Observe the oil type and maximum tem-
perature.
The 󰘰lling level in the hopper must be be-
tween min. and max.
If the return 󰘱ow pressure exceeds 2 bar
replace the 󰘰lter and change the oil.
Operating button for parking brake.
Upper position released, lower position for
parking.
Brake pressure adjustment:
Set the lever to the Road symbol prior to
transport travel.
Road Field
26