How to fix loss of suction power in Host Cleaning Equipment?
Loss of suction power in your Host Cleaning Equipment can occur if the filters are extremely dirty. You should clean or replace the filters. Also, check if the Velcro skirt is too low and adjust its height so that the lower edge just brushes the floor, aligning the slits with the corners of the Liberator.
What to do if the filter light is on in my Host Cleaning Equipment?
If the filter light is illuminated on your Host Cleaning Equipment, it could indicate several issues: First, extremely dirty filters. Try cleaning or replacing them. Second, the bagless hopper might be full, so empty it. Third, there may be a clog in the hose, shoe, or vacuum cone. Inspect these parts for any buildup.
General| Brand | Host |
|---|---|
| Model | Liberator |
| Category | Vacuum Cleaner |
| Language | English |
Initial setup and preparation for using the Liberator carpet cleaner.
Detailed procedure for cleaning carpets using the Liberator machine.
Techniques for effectively treating spots and spills with the Liberator.
Maintenance procedures for the Liberator, including filter and brush care.
Initial setup and preparation for using the Freestyle carpet cleaner.
Detailed procedure for cleaning carpets using the Freestyle machine.
Techniques for effectively treating spots and spills with the Freestyle.
Maintenance procedures for the Freestyle, including filter and brush care.
Initial setup and preparation for using the Reliant carpet cleaner.
Detailed procedure for cleaning carpets using the Reliant machine.
Techniques for effectively treating spots and spills with the Reliant.
Maintenance procedures for the Reliant, including motor vents and brush care.
To Next Page