Host Liberator - How to Clean Carpet (Reliant)

21
Vacuuming
Vacuum the area first in 2 directions: north/south
and east/west. The more vacuuming the better to
remove as much dry dirt as possible.
How to Clean Carpet with the Reliant
1
Replacing Lid on Bucket
Be sure to wipe off the edge of bucket before replacing the lid.
This will prevent leaking.
Filling the Applicator
Fill the Applicator with up to 12 pounds (5.4 kilos)
of HOST. Do not overfill!
3
4
Fill here
Hole cover
Fill port cover
2
Note: Standard (white) and firm (zebra) brushes must be broken in before using for the first time.
To break in brushes, run the Reliant on smooth concrete surface for 15 minutes.
Before Applying HOST Dry Carpet Cleaner
Place bucket on its side for 10 minutes. This will help
to distribute the liquid ingredients evenly throughout
the cleaner.
CAUTION: Nonhazardous per OSHA and EU standards when used as directed. Nontoxic
via ingestion, inhalation or skin absorption. Not a sensitizer. Not a skin or eye irritant.
However, persons with unusual skin sensitivity should protect skin from direct contact. In
case of contact with eyes, rinse with water to remove any particles. Improper use may
contribute to increased risk of health effects. NOT A WHMIS CONTROL PRODUCT.
Vacuum in 2 directions.