Host Liberator - Liberator; Getting Started (Liberator)

3
The HOST
®
System
How to Get the Best Results
Using the HOST Liberator
®
Be sure to read separate Safety & Maintenance
Instructions before using.
Plugging Liberator into Electrical Outlet
Plug the Liberator power cord into electrical outlet.
Do not use an extension cord.
Removing Liberator from Caddy
Lock Liberator handle in position by pointing red
arrowhead down. Note that there are 2 handle locks,
one on each side of machine.
Unlock locking bolts on front of caddy.
Blue/unlocked
Red/locked
Handle locking knob
Locking
bolts
Getting Started
1
a
b
Locate the switch control panel
on the back of the Liberator. Turn
on machine brushes by pressing
the black switch and drive the
Liberator off the caddy.
c
Black brush
switch
White vacuum
switch
Filter light
2