The Sypher hoverboard is a personal transporter. Our production
processes are developed with strict testing for each hoverboard.
Operating the hoverboard without following the contents of this manual
may lead to damage to your hoverboard or bodily injury.
PACKAGE CONTENTS
• Hover-1 Sypher Hoverboard
• Charger & Charging Cable
• Operation Manual
FEATURES/PARTS
1. Fender 5. Tire
2. Right Footpad 6. LED Screen
3. Protective Chasis Casing 7. Charge Port (on bottom)
4. Left Footpad 8. Power Button (on bottom)
OPERATING PRINCIPALS
The Sypher uses digital electronic gyroscopes and acceleration sensors
to control balance and motion, depending on the user's center of gravity.
The Sypher also uses a control system to operate the motors that are
located within the wheels. The Sypher has a built-in inertia dynamic
stabilization system that can assist with balance when moving forward
and backward, but not while turning.
TIP – To increase your stability, you must shift your weight during turns,
especially when entering a turn at higher speeds.
Model: Hover-1™ DSASYP
Net Weight: 16.21 lbs (7.35 kg)
Max Supported Weight: 220 lbs (100 kg)
Min Supported Weight: 44 lbs (20 kg)
Max Speed: Up to 7 mph (11.2 km/h)
Max Range: Up to 7 miles (11.2 km)
Max Incline Angle: 8°
Rated Power: 150W x 2 (dual motor)
Max Power: 200W x 2 (dual motor)
Charge Time: Up to 5 hours
Battery Type: Lithium-ion
Battery Voltage: 25.2V
Battery Capacity: 4.0Ah
Power Requirement: AC 100V240V, 50Hz/60Hz
Ground Clearance: 2 inches (5.08 cm)
Platform Height: 4.5 inches (11.43 cm)
Tire Size: 6.5 inches (16.51 cm)
Tire Type: Non-Pneumatic Solid Tires
BT ID: D042258
FCC ID: 2AANZSYP
5
SPECIFICATIONS
WARNING
To Next Page
Loading...
