23
Chapter 3: Installation
This chapter will cover the installation of the PL1200 labeling system to the host machine,
installation of the software needed to operate the PL1200 labeling unit and how to connect
the PRO Labeling 1200 labeling unit to your PC.
3.1 Installing the PL1200 Docking Station
Mounting of the docking station to the host machine will vary from site to site, depending on
the customer’s requirements.
For further information regarding site-specific mounting requirements, contact your local
representative or the factory.
3.2 PL1200 Software
The PL1200 labeling unit comes with the Brother P-Touch installation disks.
Labels are created using the Brother P-Touch software. Please see the Brother P-Touch
software manual for more information.
PL1200 Thermal Transfer Printer
Installation
To Next Page
Loading...