PL1200 Thermal Transfer Printer
Spare Parts, Decommissioning,
and Product Specifications
45
Chapter 8: Spare Parts, Decommissioning, and Product Specifications
This chapter contains a recommended spares kit and decommissioning information.
8.1 Recommended Spares Kit
•
Anti-static brush – 1 each
•
2.5 amp fuse – 2 each
•
Print head unit – 1 each
•
Labels – See Identco label specs for ordering
•
Thermal transfer print ribbon – see Identco ribbon specs for ordering
•
Pressure clips (2 pairs) 1 pair for label mandrels, 1 pair for Print ribbon mandrels
•
Custom pin-out interconnect cable – 1 each
•
28 volt 1.5 amp AC power adapter – 1 each
8.2 Decommissioning
When decommissioning the PL1200 labeling system, place it in its original packaging and
return to the manufacturer, Hover-Davis, Inc.
To Next Page