PL1200 Thermal Transfer Printer
How to Use This Guide
3
How to Use This Guide
This guide is designed to help you install, operate and maintain your PL1200 labeling system.
Each chapter begins with a brief overview followed by a complete discussion of each topic.
Chapter 1: Safety
This chapter provides information on the symbol index used in this manual, safety sticker
information, usage of the PL1200 labeling system and environmental requirements.
Chapter 2: Introduction
This chapter describes the PL1200 labeling unit product features and the hardware
component descriptions to help you become familiar with the PL1200 labeling system.
Chapter 3: Installation
This chapter covers the installation of the PL1200 docking station and labeling unit,
installation of the required software to run the PL1200 labeling system and how to connect
the PL1200 Labeling unit to your PC.
Chapter 4: Operation
This chapter covers removing and replacing the PL1200 labeling unit from the docking
station, changing the label and thermal transfer print media reels, as well as a discussion of
the print operation of the PL1200 labeling unit
Chapter 5: Maintenance
This chapter describes the maintenance required for dependable operation of the PL1200
labeling system.
To Next Page
Loading...