Now that your device is connected and the proper input is selected,
open the HDMI Viewer program. From the factory, HDMI Viewer can
be found on the desktop. If the Pilot does not have HDMI Viewer
installed, it can be downloaded for free on the HoverCam website:
http://www.thehovercam.com/download/hdmi-viewer/
With HDMI Viewer, users can mirror, annotate and record live content
from their connected device(s). For detailed HDMI Viewer
instructions, refer to the Flex 11 Manual (HDMI Viewer utilizes the
same interface and functionality as Flex 11).
Users can also use their mobile devices to screen share onto the
Pilot using the Reflector program. From the factory, the Reflector
program can be found on the Pilot’s desktop. If the program is
missing, please contact HoverCam support:
support@hovercam.com
For the reflector manual, troubleshooting and FAQ’s, please visit
the reflector support page at:
http://www.airsquirrels.com/reflector/resources/
To Next Page
Loading...