The Pilot includes a RJ45 ethernet port to simplify
imaging and facilitate wired networking. For detailed
instructions as well as the necessary drivers, please
email us at: support@thehovercam.com
For convenience, the Pilot’s required drivers are
saved on an included flash-drive for reinstallation
after imaging.
The Pilot features a fully-functional self-contained
PC, including an Intel i5 processor (or an Intel i7
processor with the Pilot Plus), a 500GB HDD (and
an additional 128GB SSD with the Pilot Plus), WiFi
and bluetooth connectivity, and other standard PC
features. An additional computer is not required to
operate the Pilot.
Once powered-on, your Pilot will operate the latest trial-
version of Windows 10. Essential functions, settings,
operations and commands are comparable to that of a
new Windows-operating desktop including interface and
system presets. A Windows license is not included, so a
license key will be needed to access the full capabilities.
For more information on how to use your Windows 10
operating system, see the full manual at
www.windows10-guide.com
To Next Page
Loading...