54 Chapter 9 D82008753R 10/15
Appendix C:
Locking Feature
Your MPV5
®
is equipped with a locking feature. Please refer to the
appropriate instructions for the controller on your MPV5.
Lock Sequence System
1. Turn the controller on.
2. To lock the chair, depress and hold the ON/OFF button. After one
second the controller will beep. Release the ON/OFF button. Move
the joystick forward until the controller beeps. Move the joystick in
reverse until the controller beeps. Release the joystick. There will be a
long beep that indicates the controller is locked.
3. To unlock, turn the controller on. The speed/response indicator will be
rippling up and down. Move the joystick forward until the controller
beeps. Then move the joystick in reverse until the controller beeps.
Release the joystick. There will be a long beep that indicates the
controller is unlocked.
ON / OFF Button
Joystick
Figure 9A - VSI Controller and new VSI Controller
To Next Page
Loading...
