20 Chapter 1 D82007778Q 09/15
2
3
1
2
3
9
7
5
1
2
8
5
3
5
6
7
1
6
4
4
6
7
9
4
2
3
9
7
5
1
6
4
Figure 1A - VR2 Figure 1B - Pilot
Figure 1C - VSI Figure 1D - Pilot +
If the joystick is not in the center position when the
controller is turned on, a fault condition is indicated.
Return the joystick to center. If the chair does not move,
reset the control by turning the power off and then on.
Joystick Controller
All the controls and indicators necessary to drive your Teknique are
located on the joystick controller. Your Teknique may be equipped
with one of the following joystick controllers.