Hoymiles MS-A2 - Technical Specifications

2
EN
LED Quick Reference Guide
LED Status Indications
Solid white when connected to the S-Miles Cloud.
Blinking white when connected to the router, but not connected to
the S-Miles Cloud.
O if no network is available.
Solid white when the system status is normal.
Solid red when the device faults.
Slow blinking white when the MS-A2 is ready for AC o-grid output.
Alternating blinking red and blinking white when there's an
o-grid port fault.
Blinking red when overloaded.
Solid white when connected to your phone.
O when not connected to your phone.
3. Technical Specications
AC Output (On-grid Port)
Nominal output apparent power (VA) 800
Max. output apparent power (VA) 800
(1)
Grid type Single-phase
Nominal AC voltage/range (V) 230/180 - 270
(2)
Nominal AC frequency/range (Hz) 50/45 - 55
(2)
Nominal output current (A) 3.48
Max. output current (A) 3.48
(3)
Power factor (@Nominal Load)
> 0.99
0.8 leading … 0.8 lagging
Total harmonic distortion (@Nominal Load) < 3%
AC Input and Output (O-grid Port)
Max. output apparent power (VA) 800
Peak output apparent power (VA) 1200, 10s
Grid type Single-phase
Connector type Schuko socket
Nominal AC voltage (V) 230
Nominal AC frequency (Hz) 50
Max. output current (A) 3.48
Total harmonic distortion (@Liner Load) <3%
Max. input power (VA) 1800
Max. input current (A) 7.83