Touchpad
Table 5-7 Touchpad description and part number
Description Spare part number
Touchpad, natural silver L64897-001
Touchpad, ash silver L64898-001
Touchpad, snowake white L64899-001
NOTE: The touchpad spare part kit does not include the cable. The cable is available as spare part
number L64900-001.
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 26).
2. Remove the bottom cover (see Bottom cover on page 27).
3. Remove the battery (see Battery on page 29).
Remove the touchpad:
1. Disconnect the cable from the ZIF connector on the touchpad (1).
2. Remove the three Phillips M2.0 × 2.0 screws (2) that secure the touchpad bracket to the computer, and
then remove the bracket (3).
3. Lift the tape that covers the screws on the top of the touchpad (4).
4. Remove the four Phillips M2.0 × 2.0 screws (5) that secure the touchpad to the computer, and then
remove the touchpad (6).
Reverse this procedure to install the touchpad.
Component replacement procedures 37
To Next Page
Loading...
Need help?
General