Steady green A 1000-Mbps link is present.
Flashing green The port is receiving or sending data at 1000 Mbps.
Off No link is present.
RPS LED
Only the HP 1920-24G-PoE+ (370W) and 1920-48G-PoE+ (370W) support the RPS.
Table 9 RPS power LED description
Status Descri
Steady green The RPS is supplying power correctly.
Off No RPS is used or the RPS is supplying power incorrectly.
Copper port mode LED
The HP 1920-48G-PoE+ (370W) uses the copper port mode LED to indicate the mode of copper port
LEDs. You can use the copper port LED switching button to change the mode of copper port LEDs.
Table 10 Copper port mode LED description
Status Descri
Steady green The copper port LEDs are Link/ACT LEDs for data transmission status.
Flashing green The copper port LEDs are PoE power LEDs for PoE status.
To Next Page
Loading...
