EasyManua.ls Logo

HP 260 G1 - Appendix C Specifications

HP 260 G1
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C Specifications
Table C-1 Specifications
Dimensions (with stand)
Height
Width
Depth
6.9 in
7.0 in
1.3 in
175 mm
177 mm
34 mm
Approximate Weight 1.6 lb 0.7 kg
Temperature Range
Operating
Non-operating
41° to 95°F
-22° to 149°F
5° to 35°C
-30° to 65°C
NOTE: Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no direct sustained
sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type and number of options installed.
Relative Humidity (noncondensing)
Operating
15-80% 15-80%
Maximum Altitude (unpressurized)
Operating
Non-operating
15,000 ft
15,000 ft
4572 m
4572 m
Power Supply
Rated Voltage Range
1
Rated Line Frequency
100-240 VAC
50-60 Hz
Maximum Operating Power <65W
Idle Operating Power 30W
1
This system utilizes an active power factor corrected power supply. This allows the system to pass the CE mark requirements for use
in the countries of the European Union. The active power factor corrected power supply also has the added benefit of not requiring
an input voltage range select switch.
106 Appendix C Specifications

Table of Contents

Other manuals for HP 260 G1

Related product manuals