Computer Setup—File
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 5-1 Computer Setup—File
Option Description
System Information Lists:
●
Manufacturer
●
Product name
●
SKU number
●
Serial number
●
Asset tag
●
Born on Date
●
System board ID and CT number
●
BIOS Revision
●
BIOS Date
●
Processor type and speed
●
Installed memory size/speed, number of channels (single or dual) (if applicable)
About Displays copyright notice.
Set Time and Date Allows you to set system time and date.
Default Setup Save Current Settings as Default
Saves the current system configuration settings as the default.
Restore Factory Settings as Default
Restores the factory system configuration settings as the default.
Apply Defaults and Exit Applies the currently selected default settings and clears any established passwords.
Ignore Changes and Exit Exits Computer Setup without applying or saving any changes.
Save Changes and Exit Saves changes to system configuration or default settings and exits Computer Setup.
Computer Setup (F10) Utilities 49
To Next Page
Loading...
