HP 285 G3 User Manual

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device
NOTE: The HP PC Hardware Diagnostics (UEFI) download instructions are provided in English only, and you
must use a Windows computer to download and create the HP UEFI support environment because only .exe les
are oered.
There are two options to download HP PC Hardware Diagnostics to a USB device.
Download the latest UEFI version
1. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed.
2. In the HP PC Hardware Diagnostics section, select the Download link, and then select Run.
Download any version of UEFI for a specic product
1. Go to http://www.hp.com/support.
2. Select Get software and drivers.
3. Enter the product name or number.
4. Select your computer, and then select your operating system.
5. In the Diagnostic section, follow the on-screen instructions to select and download the UEFI version you
want.
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device 95

HP 285 G3 Specifications

General

Operating System	Windows 10 Pro 64, Windows 10 Home 64, FreeDOS
Form Factor	Microtower
Processor	AMD A8-9600, AMD A10-9700
Graphics	AMD Radeon R5, R7
Memory	Up to 32 GB DDR4
Storage	1TB HDD, 2TB HDD, 128GB SSD, 256GB SSD, 512GB SSD
Optical Drive	DVD-Writer
Ports	4 x USB 3.1 Gen 1, 4 x USB 2.0, 1 x HDMI, 1 x VGA, 1 x RJ-45, 1 x headphone/microphone combo jack
Power Supply	180 W
Weight	4.52 kg (Weight will vary by configuration.)