Table 4·1. A2941A Line Cord Options
Part Number
Country
Male Type
8120-1351 United Kingdom
BS1363
8120-1369 Australia
AS3112
8120-1689 Europe CEE7jVII
8120-1751 US 120V
5-15P
8120-3996 US 240V
6-15P
8120-2104
Swiss SEV type 12
8120-2956
Denmark
DHCR
8120-4211 South Africa
SABS
8120-4753
Japan
JIS C 8303
System Console Installation
The recommended system console terminal for the HP 3000 9X8LXjRX family of computers
is the HP 700/96 terminal. If the customer uses any other type of terminal for the system
console, refer to the documentation that comes with the equipment for any installation
information.
HP 700/96 System Console
1. Connect the system console cable (part number A1703-63003) to the Multifunction I/O
card connector labeled Console, on the rear of the SPU.
2. Connect the other end of the system console cable to the console connector labeled
DATACOMM., located on the back of the console. Refer to the documentation that came
with the console for specific installation instructions that apply to the device being used as
the system console.
3. The HP 700/96 terminal default settings match the system requirements for terminal
configuration.
Installation 4·3
To Next Page
Loading...
Need help?
General