Customer Responsibilities
The customer is responsible for scheduling, planning, and preparing a suitable environment
for the complete computer system. The Hewlett-Packard CE will be available to assist the
customer throughout the planning and preparation for and the installation of the system.
In the
Computer Products Site Preparation Resource Guide,
read the Site Planning and
Warranty Information (Section 1) and the On-Site Customer Documents (Section 2). Pay
particular attention to the contents of the Customer Responsibilities page in Section 1 and the
forms contained in Section 2. (The forms in Section 2 will be completed as the site planning
preparation and equipment installation progresses.)
Local Codes
Special local codes exist in some locations regulating the installation of computer equipment.
The customer is responsible for making sure the system is in compliance with all local laws,
regulations, and codes for mechanical, building, and electrical distribution systems prior to
system installation.
Data Communications Equipment
The customer is responsible for ordering and installing all required data communications
equipment such as:
• Modems (Consult with CE for Hewlett-Packard requirements.)
• Telephone equipment
• Equipment supplied by companies other than Hewlett-Packard
• Any hardware or cables for connection or installation
Site Considerations 2-7
To Next Page
Loading...
