ATTENTION: System verification indicates that noncritical
devices are not all working.
This message indicates a problem with a
noncritical
device. A noncritical device is everything
except:
system disks, nonsystem (private volume) disks and tape drive logical device 7.
If there is an
error,
a message similar to the following appears:
ERROR: System verification failed. Critical devices are
not functional. Do not continue to use the system.
This message indicates a
critical
device failed. You should not attempt to use the system until
the problem has been corrected.
Critical
devices are all system disks, all non-system (private
volume) disks and tap e drive logical device 7.
Verifier log file
In addition to the messages described above, MPE/iX Verifier creates a log file named
VERLOG.
This file contains a detailed history of the verification actions and status messages and a
system I/O map which shows the current status of each device and the overall system status.
VERLOG
is created in the group and account from which Verifier is invoked. However, a file
equation can be used to redirect it to another location.
Starting the Computer System 5-5
To Next Page
Loading...
