1-5
Customer Responsibilities
The customer is responsible for scheduling, planning, and preparing a suitable environment for the
installation and operation of a complete computer system. The Hewlett-Packard CE will be available
to assist you throughout the planning and preparation for and the installation of your system.
Read the Site Planning and Warranty Information (Section 1) and the On-Site Customer Documents
(Section 2) in the Computer Products Site Preparation Resource Guide. Pay particular attention to the
contents of the Customer Responsibilities page in Section 1 and the forms contained in Section 2. (The
forms in Section 2 will be completed as the site planning/preparation and equipment installation
progresses.)
The HP 3000 9x9/KS and HP 9000 K-Class Enterprise Servers are primarily designed to be installed
and operated in computer room environments. If computers are new to your site, you will need to pay
particular attention to the following items:
• Local building codes
• Local electrical codes
• Local safety codes
• Space and weight limitations/system accessibility
• Environmental requirements (temperature, humidity, etc.)
• Electrical and grounding requirements
If your computer is to be installed in an existing computer room, you should analyze the following
items and integrate them into your site plan:
• Available space
• Environmental requirements
• Electrical requirements
To Next Page
Loading...
